Harting plugs
Han D® AV terminal block connector
Features
- Available for left- and right-hand layouts
- PE and connection terminal for contact No. 1 is accessible from above in both installation scenarios
- Can be mounted in standard bulkhead housings and on standard mounting rails using combination fixing brackets
- Screw termination with wire protection
| Number of contacts | 40, 64 |
| Rated current | 10 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 4 kV |
| Pollution degree | 3 |
| Rated voltage according to UL | 600 V |
| Insulation resistance | >1010 ? |
| Volume resistance | <=4 m? |
| Limiting temperature | -40 ... +125 °C |
| Mating cycles | >=500 |
| Material (insert) | Polycarbonate (PC) |
| Colour (insert) | RAL 7032 (pebble grey) |
| Material (contacts) | Copper alloy |
| Material flammability classifications according to UL 94 | V-0 |
| RoHS compliant | Compliant |
| Standards and approvals |
|
|
Notes: |
|
Identification:
The individual contacts are provided with the same identification on both the connection and plug side. In addition, each connection terminal can be separately labelled with a designation card.
Switch cabinet layouts:
Terminal block connector for use on the left- or right-hand side of the switch cabinet; this enables you to use the same pre-assembled system cable on both sides.
Application in the switch cabinet interior, on standard mounting rails in conjunction with Han-Snap®
Snap the multiplier onto standard mounting rails or add it to the Han D® AV terminal block connector!
Assembling the terminal block connector:
Pre-assembly possible: Thread the terminal block connector from the inside of the switch cabinet into the standard bulkhead housing.
Note:
On one side of the terminal block connector, there is a rail for connecting the PE conductor. Feed the terminal block connector side without PE conductor – slightly tilted – into the bulkhead housing from the rear!
Identification:
The individual contacts are provided with the same identification on both the connection and plug side. In addition, each connection terminal can be separately labelled with a designation card.
Suitable mating connector:
Han D® series contact inserts as counterpart with crimp termination technology
Han D® AV multiplier
Features
- Easy connection to Han D® AV terminal block connector
- Can be mounted to standard mounting rails using combination fixing brackets
- Screw termination with wire protection
| Rated current | 16 A |
| Rated voltage phase-to-earth | 400 V |
| Rated voltage phase-to-phase | 690 V |
| Rated impulse voltage | 6 kV |
| Pollution degree | 3 |
| Rated voltage according to UL | 600 V |
| Insulation resistance | >1010 ? |
| Volume resistance | <=3 m? |
| Limiting temperature | -40 ... +125 °C |
| Material (insert) | Polycarbonate (PC) |
| Colour (insert) | RAL 7032 (pebble grey) |
| Material (contacts) | Copper alloy |
| Material flammability classifications according to UL 94 | V-0 |
| Standards and approvals |
|
| Notes |
|
Identification:
The individual contacts are provided with the same identification on both the connection and plug side. In addition, each connection terminal can be separately labelled with a designation card.
Han E® AV terminal block connector
Features
- Available for left- and right-hand installations
- PE and connection terminal for contact No. 1 is accessible from above in both installation scenarios
- Can be mounted in standard bulkhead housings and on standard mounting rails using combination fixing brackets
- Screw termination with wire protection
| Number of contacts | 6, 10, 16, 24 |
| Rated current | 16 A |
| Rated voltage | 500 V |
| Rated impulse voltage | 6 kV |
| Pollution degree | 3 |
| Rated voltage according to UL | 600 V |
| Insulation resistance | >1010 ? |
| Volume resistance | <=4 m? |
| Limiting temperature | -40 ... +125 °C |
| Mating cycles | >=500 |
| Material (insert) | Polycarbonate (PC) |
| Colour (insert) | RAL 7032 (pebble grey) |
| Material (contacts) | Copper alloy |
| Material flammability classifications according to UL 94 | V-0 |
| RoHS compliance | Compliant with exemption |
| Standards and approvals |
|
|
Notes: |
|
Identification:
The individual contacts are provided with the same identification on both the connection and plug side. In addition, each connection terminal can be separately labelled with a designation card.
Han ES® AV terminal block connector
Feature
- Available for left- and right-hand layouts
- PE and connection terminal for contact No. 1 is accessible from above in both installation scenarios
- Can be mounted in standard bulkhead housings and on standard mounting rails using combination fixing brackets
- Reliable cage clamp termination
| Number of contacts | 6, 10, 16, 24 |
| Rated current | 16 A |
| Rated voltage | 500 V |
| Rated impulse voltage | 6 kV |
| Pollution degree | 3 |
| Rated current according to UL | 12 A |
| Rated current according to CSA | 12 A |
| Rated voltage according to UL | 600 V |
| Insulation resistance | >1010 ? |
| Volume resistance | <=4 m? |
| Limiting temperature | -40 ... +125 °C |
| Mating cycles | >=500 |
| Material (insert) | Polycarbonate (PC) |
| Colour (insert) | RAL 7032 (pebble grey) |
| Material (contacts) | Copper alloy |
| Material flammability classifications according to UL 94 | V-0 |
| RoHS compliance | Compliant with exemption |
| Standards and approvals |
|
| Notes: |
|
Identification:
The individual contacts are provided with the same identification on both the connection and plug side. In addition, each connection terminal can be separately labelled with a designation card.
" Han E® AV and Han® ES AV - Switch cabinet layouts "
Terminal block connector for use on the left- or right-hand side of the switch cabinet; this enables you to use the same pre-assembled system cable on both sides. Application in the switch cabinet interior, on standard mounting rails in conjunction with Han-Snap®
Assembling the terminal block connector:
The terminal block connector is inserted through the standard bulkhead housing and fastened like the standard contact insert with four fastening screws.
Pre-assembly is possible for Han E® AV and Han® ES AV, with 16 or 24 pins: Thread the terminal block connector from the inside of the switch cabinet into the standard bulkhead housing.
Note:
On one side of the terminal block connector, there is a rail for connecting the PE conductor. Feed the terminal block connector side without PE conductor – slightly tilted – into the bulkhead housing from the rear!
Identification:
The individual contacts are provided with the same numbers on both the connection and plug side. In addition, each connection terminal can be separately labelled with a designation card.
Suitable mating connector:
Han E® and Han® ES series contact inserts as counterpart with screw, crimp and cage clamp termination technology