Heat shrink tubing
Heat shrink tubing mini boxes
Heat shrink tubing box - the low priced Stex Minibox
This efficient solution is suitable for repairs of defective cables as well as for cable connections. The heat shrink tubing box is used wherever damaged cable insulation needs to be repaired, protection is needed for a plug attached to the cable, moisture penetration and thus protection against short-circuits needs to be guaranteed or general protection needs to be achieved. Heat shrink tubing is also the number one choice across all industries for the installation and repair of electronic components or for marking.
Versatile shrink properties in the heat shrink tubing box
The heat shrink tubing with the shrink rates 3:1 and 2:1 have different shrink properties and are available in different sizes. This varies depending on the shrink ratio with the 2:1 variant from 1.2/0.6mm width to 1 1/4 inch with 32/16mm width. Up to 25mm can be supplied on a Stex Minibox. The heat shrink tubing 3:1 shrinks in shrink ratio to one third of the original size. The heat shrink tubing box is available in widths from 1.5/0.5mm to 24/8mm. Larger sizes are also available in shrink ratios of 2:1 and 3:1 as heat shrink tubing by the metre.
The shrink temperature should be at least 70°C. The steel cross-linked polyolefin has a temperature resistance between -55°C and +135°C. Insulation and optimum protection are created by the supply of hot air. In many sizes, the colour options range from classic black to blue, red to green and many other colours. The most popular boxes are the black heat shrink tubing box and the green/yellow heat shrink tubing box.
The perfect heat shrink tubing for every application
To ensure ideal use and processing of the heat shrink tubing, the required parameters must be observed. These include specifying the shrink rate, the required diameter and the total quantity to be taken from the heat shrink tubing box. In the case of sensitive components, the limit temperature specified there must also be taken into account.
Safety with heat shrink tubing in the box
The material in the heat shrink tubing box offers a high degree of flexibility due to its thin wall. The fire behaviour proves to be flame resistant to flame retardant. The heat shrink tubing by the metre, the heat shrink tubing roll or the heat shrink tubing starter kit are further tried-and-tested units.
Find the practical dispenser box most suitable for your application. In addition to clear storage, it makes ideal assembly of the tubing to the required length possible.